Welcome to Pile Contractors, Inc.

Pile Contractors, Inc. has been driving piling and drilling since 1990.

For over 20 years Pile Contractors’ specially trained crews have complete in excess of 400 projects using the most up to date equipment and training. The pile driving and drilling specialists at Pile Contractors, Inc, Inc. have the most training and experience to handle any specialized foundation project.

Our relationship with our customers starts with cooperation to meet the needs of the project team. Pile Contractors, Inc. provides timely submittals, value engineering, safety, and attention to detail including prompt response from our principals. We pride ourselves in providing well trained crews, up to date equipment and timely delivery of our services. Trust that Pile Contractors Inc. will provide the most value to your project team.


Our Services

Augercast Piles

Augercast Piles are concrete piles drilled with a continuous flight auger to the specified depth. Then a high strength fluid grout is pumped through the auger, as the auger is withdrawn.

Reinforcing steel is then inserted in the completed grout column to add bending moment to the pile.


Drilled Shafts

Drilled shafts are large diameter piles drilled with a high torque machine for very high capacity foundations. Drilled shafts can be cased as required depending on soil conditions.

Reinforcing steel is placed in the excavated shaft and then concrete is placed by a full depth tremie pipe to fill the shaft. Drilled Shafts are very high capacity and are drilled with various tools including dirt augers, rock augers, core barrels, rock buckets, and clean out buckets.


Driven Piles

Driven piles are made of wood or steel and installed using an air or diesel pile hammer.

The pile installation is monitored to determine pile capacity by the soils engineer.

There are many types and capacity of driven piles - from 2 inch diameter pin piles to large H beams and pipe piles.

Driven piles are very versatile and are used to support homes, bridges, and buildings of any size. Capacity is determined during installation so each pile is considered "proven".


Soldier Pile Shoring

Soldier Pile Shoring consists of multiples piles spaced apart from each other to support a change of elevation. The piles are usually H beams installed in drilled shaft.

Timber lagging is then installed between the H beams to restrain the soil between the piles. Deeper excavations may require tiebacks to be installed at the piles for additional soil support.


Sheet Piles

Sheet Piles are interlocking steel sections that are driven in the ground to support excavations or soil removal. Since the sheets make a continuous steel wall, they are most useful to stop water infiltration, loose soil infiltration, and migration of soils. Sheet piles are manufactured in many shapes and thicknesses for use in all situations , from lightweight residential shoring to high capacity commercial structures. The Sheet Piles can be coated for corrosion protection to add a longer life under severe conditions.

Sheet Piles are installed with Vibratory hammers and impact hammers depending on the soil conditions at the site.